2198-H025-ERS 是一款 Kinetix 5500 伺服驱动器

Allen-Bradley 2198-H025-ERS 是一款运动和位置控制驱动器，是 2198 产品公告的一部分。本产品是 Kinetix 5500 以太网 I/P 伺服驱动器，具有现代控制和连接功能。该驱动器与 Studio 5000 Design 环境兼容，用于实现集成架构。使用集成架构和集成的双以太网通信接口，2198-H025-ERS 可以完全集成到 CompactLogix、ControlLogix 和 GuardLogix 控制器平台中。将此 Kinetix 变频器集成到这些控制器中，可通过附加说明和配置文件访问变频器参数。

2198-H025-ERS 在提供电压范围为 195-264V rms、3 相和 240V 标称值时运行。它还兼容 324-528V rms，3 相，标称电压电平为 480VAC。它提供 8.0 A 的连续输出电流 （rms）、11.3 A 的峰值输出电流和 4.0kW @ 195-264V rms 的三相输出功率和 8.3 kW @ 324-528V rms 的三相输出功率。

对于分支电路保护，Allen-Bradley 建议安装保险丝和断路器等保护装置。对于 2198-H025-ERS，如果用于 UL 应用，合适的保险丝是 KTK-R-20 Bussman 保险丝和塑壳 CB 140U-D6D3-C20。对于非 UL 应用，推荐的 DIN gG 保险丝为 20 A，塑壳断路器为 140U-D6D3-C20。该变频器还支持安装在共享直流或共总线驱动系统、共享交流驱动系统以及共享 AC/DC 和混合系统中。

此 Bulletin 2198 模块为三相，帧尺寸为两 （2），连续输出电流为 11.3 A 0-pk，标称驱动电压为 240 至 480 伏，输入电压范围为 324 至 528 伏 RMS。它具有双端口连接功能，可支持使用其他 CompactLogix、GuardLogix 或 ControlLogix 可编程控制器的线性、环形或星形以太网拓扑。2198-H025-ERS 伺服驱动器具有硬接线安全转矩关闭或 STO 功能。这允许逆变器功率晶体管作为对数字输入的响应而安全关闭。它支持将并行输入端子级联到相邻驱动器。为了连接外部设备并将硬接线安全连接从一个驱动器级联到另一个驱动器，请使用 STO 连接器。但是，并非所有应用都需要此安全功能。在这种情况下，必须安装跳线以绕过 STO 功能。2198-H025-ERS 模块随附安装说明、用于电机反馈的连接器套件、用于并联电源/RC 连接的接线插头连接器和用于安全转矩关闭 （STO） 的连接器、24 伏控制输入电源 （CP）、数字输入 （IOD）、主输入电源 （IPD）、电机制动器 （BC） 和电机电源。2198-H025-ERS 设计用于接地和非接地电源设置。默认情况下，为接地配置安装接地螺钉。

2198-H025-ERS 是一款 Kinetix 5500 伺服驱动器

Allen-Bradley 2198-H025-ERS is a motion and position control drive that is part of the 2198 product announcement. This product is a Kinetix 5500 Ethernet I/P servo drive with modern control and connectivity capabilities. The driver is compatible with the Studio 5000 Design environment for an integrated architecture. Using an integrated architecture and integrated dual Ethernet communication interface, the 2198-H025-ERS can be fully integrated into the CompactLogix, ControlLogix and GuardLogix controller platforms. Integrating this Kinetix drive into these controllers provides access to drive parameters via additional instructions and profiles.

The 2198-H025-ERS operates when providing a voltage range of 195-264V rms, 3-phase and 240V nominal values. It is also compatible with 324-528V rms, 3-phase, and a nominal voltage level of 480VAC. It offers 8.0A continuous output current (rms), 11.3A peak output current and 4.0KV@195-264V rms three-phase output power and 8.3kW @324-528V rms three-phase output power.

For branch circuit protection, Allen-Bradley recommends protection such as fuses and circuit breakers. For 2198-H025-ERS, suitable fuses for UL applications are KTK-R-20 Bussman fuses and Plastic-case CB 140U-D6D3-C20. For non-UL applications, the recommended DIN gG fuse is 20 A and the moulded case breaker is 140U-D6D3-C20. The inverter can also be installed in shared DC or common bus drive systems, shared AC drive systems, and shared AC/DC and hybrid systems.

This Bulletin 2198 module is three-phase, two (2) frame size, continuous output current of 11.3A 0-pk, nominal drive voltage of 240 to 480 volts, and input voltage range of 324 to 528 volts RMS. It has dual-port connectivity to support linear, ring, or star Ethernet topologies using other CompactLogix, GuardLogix, or ControlLogix programmable controllers. 2198-H025-ERS servo drive with hardwired safe torque off or STO function. This allows the inverter power transistor to be safely turned off as a response to a digital input. It supports the cascading of parallel input terminals to adjacent drivers. To connect external devices and hard-wire secure connections from one drive to another, use STO connectors. However, not all applications require this security feature. In this case, a jumper must be installed to bypass the STO feature. The 2198-H025-ERS module comes with installation instructions, connector kit for motor feedback, plug connector for parallel power /RC connection and connector for safe torque Off (STO), 24 volt control input power (CP), digital input (IOD), main input power (IPD), Motor brake (BC), and motor power supply. The 2198-H025-ERS is designed for both grounded and ungrounded power Settings. By default, ground screws are installed for the grounding configuration.