2097-V34PR3-LM 以太网 I/P 单轴伺服驱动器

Allen-Bradley 2097-V34PR3-LM 是一款 Kinetix 300 以太网 I/P 伺服驱动器。该驱动器经过专门设计，可简化与更高和更现代的控制系统的集成，因为它带有嵌入式以太网通信接口，可用于与现有或新安装的以太网网络建立连接。通过嵌入式以太网端口，该驱动器可以集成到 CompactLogix 和 ControlLogix 可编程自动化控制器 （PAC） 中。

通过将变频器集成到支持的 PAC 产品中，变频器参数在转换为指令时成为用户程序不可或缺的一部分。这些参数可以根据条件和预编程参数集的状态进行修改。

2097-V34PR3-LM 提供 320-528VAC rms、3 相和 48-62 Hz 的输入频率要求，而最大主交流输入电流为 2.7 安培，标称和最大浪涌电流额定值为 4.5 安培（0 包）。该驱动器的连续输出电流 （rms） 为 2.0 A，连续输出电流 （0-pk） 为 2.8 安培，而连续输出电流 @ 480VAC 为 1.0 kW。此外，峰值输出电流 （rms） 为 6.0 A，峰值输出电流 （0-pk） 为 8.5 安培。该驱动器具有安全的扭矩关闭功能。此外，2097-V34PR3-LM 的过压额定值为 850VDC，短路电流额定值为 100,000 A （rms） 对称。

2097-V34PR3-LM 的额定功率为 1.0 kWatts，可为各种操作提供最佳功率。该器件还具有总额定值为 2.8 安培的连续输出电流。设备提供的这种电源选项组合可确保最佳功能和高性能，无论安装设置和连接到设备的特定设备如何。该器件需要 480 伏交流电的额定输入电压才能获得最佳性能，这符合大多数工业电源设置;因此，通常不需要额外的变压器来为该器件提供正确的输入电压额定值。想要依赖 2097-V34PR3-LM 的设施应确保他们获得在工业环境中经验丰富的专业技术人员来初始安装设备。必须完成各种写入操作才能获得足够的性能;不正确的安装可能会导致不稳定或不必要的操作故障，使设施面临进一步并发症的风险。

2097-V34PR3-LM 以太网 I/P 单轴伺服驱动器

Allen-Bradley 2097-V34PR3-LM is a Kinetix 300 Ethernet I/P servo drive. The drive has been specifically designed to simplify integration with higher and more modern control systems, as it comes with an embedded Ethernet communication interface that can be used to establish connections with existing or newly installed Ethernet networks. With an embedded Ethernet port, the driver can be integrated into CompactLogix and ControlLogix Programmable Automation controllers (PACs).

By integrating the frequency converter into supported PAC products, the frequency converter parameters become an integral part of the user's program when converted into instructions. These parameters can be modified based on conditions and the state of the pre-programmed parameter set.

The 2097-V34PR3-LM offers 320-528VAC rms, 3-phase, and 48-62 Hz input frequency requirements, while the maximum main AC input current is 2.7 amps and the nominal and maximum surge current ratings are 4.5 amps (0 packets). The driver has A continuous output current (rms) of 2.0 A, a continuous output current (0-pk) of 2.8 amps, and a continuous output current @ 480VAC of 1.0 kW. In addition, the peak output current (rms) is 6.0 A and the peak output current (0-pk) is 8.5 amps. The drive has a safe torque off feature. In addition, the 2097-V34PR3-LM has an overvoltage rating of 850VDC and A short circuit current rating of 100,000 A (rms) symmetric.

The 2097-V34PR3-LM is rated at 1.0 kWatts, providing optimal power for a wide range of operations. The device also has a continuous output current with a total rating of 2.8 amps. This combination of power options provided by the device ensures optimal functionality and high performance, regardless of the installation setup and the specific device connected to the device. The device requires a rated input voltage of 480 volts AC for optimal performance, which is in line with most industrial power Settings; Therefore, an additional transformer is usually not required to provide the correct input voltage rating for the device. Facilities that want to rely on 2097-V34PR3-LM should ensure that they have access to skilled technicians experienced in industrial environments to initially install the equipment. Various write operations must be done to achieve adequate performance; Incorrect installation can lead to instability or unnecessary operational failures, putting the facility at risk of further complications.