25-COMM-E2P 双端口以太网/IP 适配器

25-COMM-E2P 双端口以太网/IP 适配器

25-COMM-E2P 适配器是由 Allen-Bradley/Rockwell Automation 设计的 PowerFlex 520 系列双端口以太网/IP 适配器，可与 PowerFlex 520 系列变频器配合使用，为它们提供网络通信。此适配器安装在主机 PowerFlex 520 驱动器内。它的一些物理部件包括通信卡驱动器接头、节点地址交换机、CS1 和 CS2 端子、2 个以太网/IP 端口和状态指示灯。其他一些功能包括支持星形、线性和设备级环形网络拓扑，以及支持可在向驱动器通电之前设置网络节点地址的交换机。也可以禁用这些交换机，改用 BOOTP 服务器。Allen-Bradley/Rockwell Automation 25-COMM-E2P 双端口以太网/IP 适配器的状态指示灯报告适配器的运行状态和网络通信。该适配器附带的参数已在 I/O 中配置了 16 位数据链路，以满足各种应用要求。

该适配器与 Allen-Bradley/Rockwell Automation PowerFlex 525 和 523 系列变频器完全兼容。Allen-Bradley/Rockwell Automation 25-COMM-E2P 双端口以太网/IP 适配器是一种组播设备，可能需要 IGMP 侦听交换机才能在某些系统或应用程序中正常运行。该适配器配有显示屏和键盘，可用于输入和修改不同的适配器参数。在安装 Allen-Bradley/Rockwell Automation 25-COMM-E2P 双端口以太网/IP 适配器之前，需要从主机驱动器上完全断开电源，以确保不会损坏系统中的设备，也不会对用户造成伤害。

25-COMM-E2P 双端口以太网/IP 适配器

The 25-COMM-E2P adapter is a PowerFlex 520 Series dual-port Ethernet /IP adapter designed by Allen-Bradley/Rockwell Automation for use with PowerFlex 520 Series drives. Provide them with network communication. This adapter is installed in the host PowerFlex 520 drive. Some of its physical components include communication card driver connectors, node address switches, CS1 and CS2 terminals, 2 Ethernet /IP ports, and status indicators. Some other features include support for star, linear, and device-level ring network topologies, as well as switches that can set network node addresses before powering the drive. You can also disable these switches and use BOOTP servers instead. Allen-Bradley/Rockwell Automation 25-COMM-E2P Dual port Ethernet /IP adapter Status indicator Reports the operating status and network communication of the adapter. The parameters that come with this adapter have been configured with a 16-bit data link in I/O to meet various application requirements.

The adapter is fully compatible with Allen-Bradley/Rockwell Automation PowerFlex 525 and 523 series drives. Allen-Bradley/Rockwell Automation 25-COMM-E2P dual-port Ethernet /IP adapter is a multicast device that may require an IGMP listening switch to function properly in some systems or applications. The adapter is equipped with a display and keyboard that can be used to enter and modify different adapter parameters. Before installing the Allen-Bradley/Rockwell Automation 25-COMM-E2P dual port Ethernet /IP adapter, you need to completely disconnect the power from the host drive to ensure that you do not damage the devices in the system and do not cause harm to the user.