20F1ANC205JN0NNNNN 具有 110 kW 的额定 ND 输出功率

20F1ANC205JN0NNNNN 具有 110 kW 的额定 ND 输出功率

20F14NC205JN0NNNNN PowerFlex 753 交流变频器由 Allen-Bradley/Rockwell Automation 制造，在世界各地用于需要低功耗控制单元的各种应用。该驱动器包括 ABS、CE、CUL、C-Tick、RINA、RoHS 和 ATEX 认证等认证。该产品系列旨在满足尽可能多的不同应用需求和多种要求。20F14NC205JN0NNNNN 驱动器旨在与 400 伏交流或 540 伏直流电源一起使用，分 3 相运行。除此之外，驱动器的输入还包括带预充电功能的直流输入。驱动器由开放式机箱 （NEMA/UL） 保护，因此其防护等级为 IP 00/IP 20。该驱动器的输入频率为 50 赫兹，额定电流为 205 安培，功率输出额定值为 110 千瓦。

除此之外，Allen-Bradley/Rockwell Automation 20F14NC205JN0NNNNN 变频器还配有过滤器和跳线，作为其出厂默认的 CM 帽连接。该型号不包括动态制动或编程模块，这些模块可作为驱动器和本系列中其他驱动器的选件提供。20F14NC205JN0NNNNN 驱动器具有保护功能，可为其提供必要的保护，防止过流、欠压、接地故障、短路和其他可能导致延迟和系统故障的异常情况。如果考虑标称线路电压，该驱动器在额定电流下的效率高达 97.5%。驱动器的最大短路额定值为 200,000 安培 RMS 对称，而其实际短路额定值取决于其电路保险丝或断路器 AIC 额定值。

20F1ANC205JN0NNNNN 具有 110 kW 的额定 ND 输出功率

The 20F14NC205JN0NNNNN PowerFlex 753 AC inverter is manufactured by Allen-Bradley/Rockwell Automation and is used around the world in a variety of applications requiring low power control units. The drive includes ABS, CE, CUL, C-Tick, RINA, RoHS and ATEX certifications. The product range is designed to meet as many different application needs and multiple requirements as possible. The 20F14NC205JN0NNNNN driver is designed to be used with a 400 volt AC or 540 volt DC power supply, operating in 3 phases. In addition, the driver input also includes a DC input with a pre-charge function. The drive is protected by an open chassis (NEMA/UL), so its protection level is IP 00/IP 20. The driver has an input frequency of 50 Hz, a rated current of 205 amps and a power output rating of 110 kW.

In addition to this, the Allen-Bradley/Rockwell Automation 20F14NC205JN0NNNNN inverter also comes with a filter and jumper as its factory default CM cap connection. This model does not include dynamic braking or programming modules, which are available as options for the drive and other drives in this series. The 20F14NC205JN0NNNNN driver has a protection feature that provides it with the necessary protection against overcurrent, undervoltage, ground faults, short circuits, and other abnormal conditions that can cause delays and system failures. If the nominal line voltage is taken into account, the driver has an efficiency of up to 97.5% at the rated current. The driver has a maximum short circuit rating of 200,000 amps RMS symmetry, while its actual short circuit rating depends on its circuit fuse or circuit breaker AIC rating.