1783-SFP100LX 是一款 1000 Base LX/LH 单模光纤设备

1783-SFP100LX 是一款 1000 Base LX/LH 单模光纤设备

1783-SFP100LX收发器是由艾伦-布拉德利/罗克韦尔自动化公司设计和制造的可插拔收发器。它用于通过使用组合的无线电发射器和接收器来发送和接收通信数据。它是一款 1000 Base LX/LH 单模光纤设备，是 Allen-Bradley Stratix 8000/83000 系列的一部分。

它在 10 公里范围内正常工作。它带有1 GB的内存。收发器的磁芯/包层尺寸为 G.652 微米。它已通过ROSTECHNADZOR和KC标准的认证。收发器产生的波长为 1310 N-m。它的外形小巧，可以轻松插入。它配有双LC连接器，支持数字光学监控。监控是通过命令行界面或 CLI 完成的。

Allen-Bradley/Rockwell Automation 1783-SFP100LX收发器只能用于额定温度在 -40 到 85 摄氏度之间的工业用途。安装模块后，组合模块的整体温度额定值仅限于最低温度额定值和最高最低温度额定值。1783-SFP1GLX 收发器受 Stratix 2000 千兆以太网 SFP 插槽支持。1783-SFP1GLX 收发器与 Allen-Bradley 5700 系列交换机配合使用。这些开关具有 50 伏的隔离电压，并带有基本绝缘。它们还配备了 RJ 45 以太网连接器。开关使用 18 至 20 AWG 实心或绞合铜线，额定温度为 30 摄氏度或更高。1783-SFP1GLX 收发器具有开放式外壳，应防止喷水。还应远离EMC噪声源和静电放电源，以确保其使用寿命长。

1783-SFP100LX 是一款 1000 Base LX/LH 单模光纤设备

The 1783-SFP100LX transceiver is a pluggable transceiver designed and manufactured by Allen-Bradley/Rockwell Automation. It is used to send and receive communication data through the use of a combined radio transmitter and receiver. It is a 1000 Base LX/LH single-mode fiber optic device that is part of the Allen-Bradley Stratix 8000/83000 series.

It works at a range of 10 kilometers. It comes with 1 GB of memory. The transceiver has a core/cladding size of G.652 microns. It is certified to ROSTECHNADZOR and KC standards. The wavelength generated by the transceiver is 1310 N-m. Its compact shape makes it easy to plug in. It is equipped with dual LC connectors and supports digital optical monitoring. Monitoring is done through the command line interface or CLI.

The Allen-Bradley/Rockwell Automation 1783-SFP100LX transceiver can only be used for industrial use at temperatures rated between -40 and 85 degrees Celsius. After the module is installed, the overall temperature rating of the combined module is limited to the lowest temperature rating and the highest minimum temperature rating. The 1783-SFP1GLX transceiver is supported by the Stratix 2000 Gigabit Ethernet SFP slot. The 1783-SFP1GLX transceiver is used with Allen-Bradley 5700 series switches. These switches have an isolation voltage of 50 volts and come with basic insulation. They are also equipped with an RJ 45 Ethernet connector. The switch uses 18 to 20 AWG solid or stranded copper wire with a temperature rating of 30 degrees Celsius or higher. The 1783-SFP1GLX transceiver has an open housing and should be protected from water spraying. It should also be kept away from EMC noise sources and electrostatic discharge sources to ensure their long service life.

1783-SFP100LX 是一款 1000 Base LX/LH 单模光纤设备

型号推荐

3604E 康吉森 Triconex DCS 数字输出模块

3636R 康吉森 Triconex DCS 通信模块

3501E 康吉森 Triconex DCS 输入数字模块组件

3601E 康吉森 Triconex DCS 数字输出模块

3805H 康吉森 Triconex DCS 数字输入模块

9668-110 康吉森 Triconex DCS 控制板终止

3502E 康吉森 Triconex DCS 通信模块

4101 康吉森 Triconex DCS 通信模块

4107 康吉森 Triconex DCS 通信模块

4118 康吉森 Triconex DCS 通信模块

4119 康吉森 Triconex DCS 通信模块

4119A 康吉森 Triconex DCS 通信模块

2551 康吉森 Triconex DCS 二酯型终止子

4000163-510 康吉森 Triconex DCS 模拟输出模块