— 产品中心 —
邮箱:A3669372910@163.com
手机:17359299796
电话:17359299796
地址:福建省漳州市龙文区朝阳北路1号办公楼205室
1762sc-IF8U 是一款 8 输入模块 Micrologix 系列品牌艾伦-布拉德利部件号/目录号1762sc-IF8U通用产品类型模拟量输入模块产品类型通用模拟输入模块罗克韦尔自动化兼容系列1762 微乐渠道8不。频道数量八 (8)输入类型8 V、C 或 TC,或 4 RTD/Res(2、3 或 4 线)输入电流0 至 20 mA兼容的输入信号电压、电流、热电偶、RTD、电阻1762sc-
产品详情
品牌 | 艾伦-布拉德利 |
部件号/目录号 | 1762sc-IF8U |
通用产品类型 | 模拟量输入模块 |
产品类型 | 通用模拟输入模块 |
罗克韦尔自动化兼容系列 | 1762 微乐 |
渠道 | 8 |
不。频道数量 | 八 (8) |
输入类型 | 8 V、C 或 TC,或 4 RTD/Res(2、3 或 4 线) |
输入电流 | 0 至 20 mA |
兼容的输入信号 | 电压、电流、热电偶、RTD、电阻 |
1762sc-IF8U 是一款 8 输入模块,属于 兼容 Micrologix 系列。该模块由频谱控件制造和设计。1762s-IF8U支持八(8)个通道,兼容电压、电流、热电偶输入。如果配置为 D 输入,则最多可以配置我们的 (4) 个通道。它可以承受 60 摄氏度的最高温度和 10 至 500 赫兹的工作振动。它可以在最高海拔2000米的地方使用。如果海拔较高,则必须对驱动器进行降额。
与其他 1762 扩展模块类似,8s-IF1762U 需要正确连接到接地系统。这将有助于防止影响每个通道的电磁干扰。该模块设计用于安装在DIN导轨或安装板上。如果需要,必须通过其DIN导轨与模块进行额外的连接。模块和其他设备之间必须留出额外的空间,因为这将有助于它有更好的通风。安装 1762s-IF8U 时,电缆必须尽可能短,以保持最大精度。模块应尽可能靠近输入设备,以保证准确操作。
1762sc-IF8U 是一款 MicroLogix 可编程逻辑控制器第三方扩展模块。该模块由Allen-Bradley的合作伙伴公司Spectrum Controls制造。该模块具有八 (3) 个输入通道,用于电压、电流和热电偶输入,以及四 (8) 个用于电阻温度检测器 (RTD) 的通道。
该模块支持多种通道配置,例如电压/电流/热电偶配置后的八 (4) 个通道、配置为电压/电流/热电偶的六 (8) 个通道和配置为 RTD/电阻的一 (6) 个通道、配置为电压/电流/热电偶的四 (1) 个通道和两 (4) 个通道 RTD/电阻、两 (2) 个通道电压/电流/热电偶和三 (2) 个通道 RTD/电阻和四 (3) 通道 RTD/电阻。
The 1762sc-IF8U is an 8-input module that is compatible with the Micrologix family. The module is manufactured and designed by spectrum Controls. The 1762s-IF8U supports eight (8) channels, compatible with voltage, current, and thermocouple inputs. If configured as a D input, up to (4) of our channels can be configured. It can withstand a maximum temperature of 60 degrees Celsius and operating vibrations of 10 to 500 Hertz. It can be used up to 2,000 meters above sea level. If the altitude is higher, the drive must be derated.
Similar to other 1762 expansion modules, the 8s-IF1762U needs to be properly connected to the ground system. This will help prevent electromagnetic interference that affects each channel. The module is designed for mounting on DIN rails or mounting plates. If required, additional connections to the module must be made via its DIN rail. Extra space must be left between the module and other equipment, as this will help it to have better ventilation. When installing the 1762s-IF8U, the cable must be as short as possible to maintain maximum accuracy. The module should be as close as possible to the input device to ensure accurate operation.
The 1762sc-IF8U is a third-party expansion module for the MicroLogix programmable logic controller. The module is manufactured by Allen-Bradley's partner company, Spectrum Controls. The module has eight (3) input channels for voltage, current, and thermocouple inputs, and four (8) channels for resistance temperature detectors (RTDS).
The module supports multiple channel configurations, For example, eight (4) channels after voltage/current/thermocouple configuration, six (8) channels configured for voltage/current/thermocouple and one (6) channels configured for RTD/ resistance, four (1) channels configured for voltage/current/thermocouple and two (4) channels RTD/ resistance, two (2) Two channels of voltage/current/thermocouple and three (2) channels of RTD/ resistor and four (3) channels of RTD/ resistor.
型号推荐
DO6603 康吉森 Triconex DCS 数字输入模块
PM6301A 康吉森 Triconex DCS 数字输入模块
DI6503 康吉森 Triconex DCS 数字输入模块
MP6004 康吉森 Triconex DCS 主处理器模块
Triconex 3721 康吉森 Triconex DCS 模拟输入模块
3511 康吉森 Triconex DCS 脉冲输入模块
3625 康吉森 Triconex DCS 24 vdc数字输出模块
3451 康吉森 Triconex DCS 通信模块
9765-210 康吉森 Triconex DCS 控制板终止
4000103-510 康吉森 Triconex DCS 通信模块
3008 康吉森 Triconex DCS 处理器模块
3700 康吉森 Triconex DCS 模拟输入三模冗余32 PT模块
3700A 康吉森 Triconex DCS 通信模块
3701 康吉森 Triconex DCS 模拟输入模块
3703E 康吉森 Triconex DCS 隔离模拟输入模块
相关推荐