1336-BDB-SP37C 工控备件卡件模块

1336-BDB-SP37C 工控备件卡件模块

1336-BDB-SP37C 工控备件卡件模块

A-B1336-BDB-SP37C 伺服驱动器功率板  以便在监控驱动器时提供完全的灵活性  性能方面，1336 PLUS II为  液晶超扭曲显示在人机界面模块上。

  此功能提供两行16个字符，每行可以  显示按用户可选单位缩放的任意两个驱动器参数。  

每行使用8个值显示字符和8个可编程字符  用于创建流程显示的文本字符。简单的按键  可以将过程显示为所示的标准显示  通电时。  

一般来说，1336 PLUS II适用于直接连接到正确电压的交流线路，该线路的小阻抗为1%（以下为3%）  0.37-22 kW/0.5-30 HP驱动器）相对于额定驱动器输入kVA。

如果线路阻抗较低，则应安装线路电抗器或隔离变压器  必须在驱动器之前添加，以增加线路阻抗。

如果线路阻抗过低，则会出现瞬态电压尖峰或中断  可能会产生过大的电流峰值，这将导致有害的输入保险丝熔断、过压故障，并可能导致驱动器损坏  权力结构。

1336-BDB-SP37C 工控备件卡件模块

A-B1336-BDB-SP37C servo driver power board to provide complete flexibility when monitoring the driver in terms of performance, 1336 PLUS II is displayed on the HMI module for LCD superdistortion.

This feature provides two lines of 16 characters, each of which can display any two drive parameters scaled in user-selectable units.

Each line uses 8 value display characters and 8 programmable characters to create text characters for process display. A simple keystroke can display the process as shown in the standard display when powered on.

In general, the 1336 PLUS II is suitable for AC lines directly connected to the correct voltage with a small impedance of 1% (below 3%) 0.37-22 kW/0.5-30 HP driver) relative to the rated driver input kVA.

If the line impedance is low, a line reactor or isolation transformer must be installed before the driver to increase the line impedance.

If the line impedance is too low, transient voltage spikes or interruptions may produce excessive current spikes, which will cause harmful input fuses to blow, overvoltage failures, and may cause the driver to damage the power structure.