AB 1203-GK5 通讯模块

AB 1203-GK5 通讯模块

AB 1203-GK5 通讯模块

Allen-Bradley 1203-GK5模块的输入电压为12-25伏直流电，输入电流为110毫安。1203-GK5上的SCANport负载为60毫安。1203-GK5的波特率为125、250和500 k BPS。

1203-GK5模块安装在DIN导轨系统上，并使用SCANport电缆连接到SCANport产品。模块上的某些功能包括DIP开关，使用户能够在将模块连接到DeviceNet网络之前对其进行配置。该模块还具有故障节点恢复系统，使您可以更改设备的节点地址。用户故障响应配置允许用户自定义适配器操作以解决通信错误，LED指示灯可帮助诊断网络和SCANport运行状况。设置1203-GK5所需的工具和设备如下：DeviceNet通信模块（1203-GK5），5针或10针插入式连接器，35 x 7.5 mm DIN导轨，1/8”平头螺丝起子，以及用于SCANport和DeviceNet连接的适当电缆。

1203-GK5模块的规格包括12至25 V DC的输入电压，110 mA的输入电流和60 mA的SCANport负载。环境规格包括：工作温度应保持在0到50摄氏度之间，存储温度应保持在-40到85摄氏度之间，相对湿度应保持在0到95％之间（无冷凝）。 ）。通信规范的波特率如下：125、250和500 k BPS。设备的机械尺寸包括：高度76毫米（3.0英寸），宽度45毫米（1.8英寸），深度123毫米（4.8英寸），NEMA 1型外壳和DIN导轨35毫米x 7.5毫米（1.38英寸x 0.30英寸）的标准尺寸。 

AB 1203-GK5 通讯模块

The Allen-Bradley 1203-GK5 module has an input voltage of 12-25 volts DC and an input current of 110 MA. The SCANport load on the 1203-GK5 is 60 mah. The 1203-GK5 has baud rates of 125, 250 and 500 k BPS.

The 1203-GK5 module is mounted on a DIN rail system and is connected to SCANport products using SCANport cables. Some of the features on the module include DIP switches that enable users to configure the module before connecting it to the DeviceNet network. The module also has a failed node recovery system that allows you to change the node address of the device. User fault response configuration allows users to customize adapter operations to resolve communication errors, and LED indicators help diagnose network and SCANport health. The tools and equipment required to set up the 1203-GK5 are as follows: DeviceNet communication module (1203-GK5), 5-pin or 10-pin plug-in connectors, 35 x 7.5mm DIN rail, 1/8 "flat head screwdriver, and appropriate cables for SCANport and DeviceNet connections.

The specifications for the 1203-GK5 module include input voltages from 12 to 25 V DC, input currents from 110 mA, and SCANport loads of 60 mA. Environmental specifications include: The operating temperature should be maintained between 0 and 50 degrees Celsius, the storage temperature should be maintained between -40 and 85 degrees Celsius, and the relative humidity should be maintained between 0 and 95% (without condensation). . The baud rates of the communication specification are as follows: 125, 250, and 500 k BPS. The mechanical dimensions of the equipment include: height 76 mm (3.0 in), width 45 mm (1.8 in), depth 123 mm (4.8 in), NEMA Type 1 housing and DIN rail 35 mm x 7.5 mm (1.38 in x 0.30 in) standard dimensions.