罗克韦尔Allen-Bradley变频器 AB模块1769-OW8I

罗克韦尔Allen-Bradley变频器 AB模块1769-OW8I

罗克韦尔Allen-Bradley变频器 AB模块1769-OW8I

Allen-Bradley 1769-OW8I是一个紧凑型I/O模块，带有八(8)个常开通道。该模块的每个通道都是单独隔离的，这允许该模块的每个通道以不同的电压类别工作。

模块的底板电流消耗在5.1伏时为125毫安，在24伏时为100毫安。1769-OW8I模块的最大电流为每点2.5安培，每个模块16安培，最大功耗为2.83瓦。在5伏DC下，它的最小通态电流为10 mA，最大关态漏电为0 mA。该模块的工作电压为5至265伏交流电/5至125伏DC。该模块在10至500赫兹时的工作振动为5 G，继电器的工作振动为2G。1769-OW8I的工作温度为0至60摄氏度，非工作温度为-40至85摄氏度。其相对湿度范围从5%到95%，无冷凝。

Allen-Bradley 1769-OW8I模块具有可用的LED状态指示灯，并且具有开放式外壳。兼容电缆为22至16 AWG绞合电缆和22至14 AWG实心电缆，兼容电源为1769-PA2、1769-PA4、1769-PB2和1769-PB4。请注意，用户只能通过使用DIN导轨或面板安装底座来安装该模块。使用DIN导轨安装时，该模块的继电器工作冲击为5 G，工作冲击为20 G，非工作冲击为30 G。面板安装的1769-OW8I模块的继电器工作冲击为7.5 G，工作冲击为30 G， 以及40 G的非工作冲击。在10至500赫兹时，其工作振动为5 G，继电器工作振动为2G。Allen-Bradley 1769紧凑型I/O模块可与CompactLogix控制器一起使用，用于MicroLogix 1500控制器组件中的扩展I/O、1769-ADN DeviceNet适配器以及1769-AENTR以太网适配器。

罗克韦尔Allen-Bradley变频器 AB模块1769-OW8I

The Allen-Bradley 1769-OW8I is a compact I/O module with eight (8) normally open channels. Each channel of the module is individually isolated, which allows each channel of the module to operate in a different voltage class.

The base plate current consumption of the module is 125 mah at 5.1 volts and 100 mah at 24 volts. The 1769-OW8I module has a maximum current of 2.5 amps per point, 16 amps per module, and a maximum power consumption of 2.83 watts. At 5 volts DC, it has a minimum on-state current of 10 mA and a maximum off-state leakage of 0 mA. The module operates at 5 to 265 volts AC /5 to 125 volts DC. The module has an operating vibration of 5 G at 10 to 500 Hz and the relay has an operating vibration of 2G. The 1769-OW8I has an operating temperature of 0 to 60 degrees Celsius and a non-operating temperature of -40 to 85 degrees Celsius. Its relative humidity ranges from 5% to 95%, with no condensation.

The Allen-Bradley 1769-OW8I module has an available LED status indicator and has an open housing. Compatible cables are 22 to 16 AWG stranded cables and 22 to 14 AWG solid cables, and compatible power supplies are 1769-PA2, 1769-PA4, 1769-PB2 and 1769-PB4. Please note that the user can only install the module by using the DIN rail or panel mount base. When installed using DIN rail, the module has a relay operating shock of 5 G, an operating shock of 20 G, and a non-operating shock of 30 G. The panel-mounted 1769-OW8I module has a relay operating shock of 7.5G, an operating shock of 30 G, and a non-operating shock of 40 G. At 10 to 500 Hz, its operating vibration is 5 G and the relay operating vibration is 2G. The Allen-Bradley 1769 compact I/O module can be used with the CompactLogix controller for extended I/O in the MicroLogix 1500 controller assembly, the 1769-ADN DeviceNet adapter, and the 1769-AentR Ethernet adapter.