1762-IF4 罗克韦尔 PLC控制模块

1762-IF4 罗克韦尔 PLC控制模块

1762-IF4 罗克韦尔 PLC控制模块

1762-IF4 是一个 4 通道电压/电流模拟输入模块，可连接到 MicroLogix 控制器。1762-IF4 可通过 DIN 导轨或面板安装进行安装。

1762-IF4 是一款紧凑型四 （4） 个差分通道模拟输入模块。该模块支持 4-20 mA 和 -10 至 10V 直流信号。该模块兼容 MicroLogix 1100、1200 和 1400 可编程逻辑控制器。

1762-IF4 是一款具有 1200 通道电流/电压模拟输入模块的 Allen-Bradley MicroLogix 4。它具有一个Δ-Σ转换器和4个差分（双极性）输入。其模拟工作电压范围为 -10 至 10 伏直流正常和 -10.5 至 10.5 伏直流满量程。其模拟工作电流范围为正常 4 至 20 mA，满量程时为 -21 至 21 mA。该模块通过允许对系统进行额外的I/O来增强MicroLogix的功能。它需要最小的间距，可以DIN导轨或面板安装。该模块通过 5 总线接口通信和接收 24 至 1762 伏直流电源的信息。

接线输入接线端子时，存在手指安全盖。扁平带状电缆用于连接各种 I/O 模块。1762-IF4 模块支持 2 线、3 线或 4 线变送器配置。在故障排除期间，用户应始终远离设备，并始终检查是否有任何程序更改。

1762-IF4 罗克韦尔 PLC控制模块

The 1762-IF4 is a 4-channel voltage/current analog input module that can be connected to a MicroLogix controller. The 1762-IF4 can be mounted with DIN rail or panel mounting.

The 1762-IF4 is a compact four (4) differential channel analog input module. The module supports 4-20 mA and -10 to 10V DC signals. The module is compatible with MicroLogix 1100, 1200 and 1400 programmable logic controllers.

The 1762-IF4 is an Allen-Bradley MicroLogix 4 with a 1200 channel current/voltage analog input module. It has a Delta-Sigma converter and 4 differential (bipolar) inputs. Its analog operating voltage range is -10 to 10 volts DC normal and -10.5 to 10.5 volts DC full scale. Its analog operating current ranges from 4 to 20 mA normally and -21 to 21 mA at full scale. This module enhances the functionality of MicroLogix by allowing additional I/O to the system. It requires minimal spacing and can be DIN rail or panel mounted. The module communicates and receives information from a 24 to 1762 volt DC power supply via a 5 bus interface.

A finger safety cover exists when wiring input terminals. Flat ribbon cables are used to connect various I/O modules. The 1762-IF4 module supports 2-, 3 - or 4-wire transmitter configurations. During troubleshooting, the user should always stay away from the device and always check for any program changes.