1732E-IB16M12DR控制器

1732E-IB16M12DR控制器

1732E-IB16M12DR控制器

（1）编程和工程工具 编程和工程工具包括所有基于PLC或PC用于编程、组态、模拟和维护等控制所需的工具。STEP 7标准软件包SIMATIC S7是用于S7-300/400，C7 PLC和SIMATIC WinAC基于PC控制产品的组态编程和维护的项目管理工具，STEP 7-Micro/WIN是在Windows平台上运行的S7-200系列PLC的编程、在线仿真软件。

（2）基于PC的控制软件 基于PC的控制系统WinAC允许使用个人计算机作为可编程序控制器（PLC）运行用户的程序，运行在安装了Windows NT4.0操作系统的SIMATIC工控机或其它任何商用机。WinAC提供两种PLC，一种是软件PLC，在用户计算机上作为视窗任务运行。另一种是插槽PLC（在用户计算机上安装一个PC卡），它具有硬件PLC的全部功能。WinAC与SIMATIC S7系列处理器完全兼容，其编程采用统一的SIMATIC编程工具（如STEP 7），编制的程序既可运行在WinAC上，也可运行在S7系列处理器上。

（3）人机界面软件 人机界面软件为用户自动化项目提供人机界面（HMI）或SCADA系统，支持大范围的平台。人机界面软件有两种，一种是应用于机器级的ProTool，另一种是应用于监控级的WinCC。

1732E-IB16M12DR控制器

(1) Programming and Engineering tools Programming and engineering tools include all PLC or PC-based tools needed for programming, configuration, simulation and maintenance controls. The STEP 7 standard package SIMATIC S7 is a project management tool for configuration programming and maintenance of the S7-300/400, C7 PLC and SIMATIC WinAC PC-based control products. STEP 7-Micro/WIN is a programming and online simulation software for S7-200 series PLC running on Windows platform.

(2) PC-based control software PC-based control system WinAC allows the use of a personal computer as a programmable controller (PLC) to run the user's programs, running on the SIMATIC industrial computer installed with the Windows NT4.0 operating system or any other commercial computer. WinAC offers two types of PLCS, one is a software PLC that runs as a Windows task on the user's computer. The other is a slot PLC (a PC card installed on the user's computer), which has all the functions of a hardware PLC. WinAC is fully compatible with SIMATIC S7 series processors, and its programming uses a unified SIMATIC programming tool (such as STEP 7), and programs can run on both WinAC and S7 series processors.

(3) Human Machine Interface software Human Machine Interface software provides Human Machine interface (HMI) or SCADA systems for user automation projects, supporting a wide range of platforms. There are two kinds of human-machine interface software, one is ProTool applied to the machine level, and the other is WinCC applied to the monitoring level.