1756-OB16E美国进口模拟输入模块 系统自动化模块备件

1756-OB16E美国进口模拟输入模块 系统自动化模块备件

1756-OB16E美国进口模拟输入模块 系统自动化模块备件

1756-OB16E 是一个单槽宽模块，兼容任何 1756 ControlLogix 控制器。它可以安装到任何 1756 ControlLogix 机架，特别是 1756-A4；1756-A17；1756-A10；1756-A13 和 1756-A17。此外，它可以用作本地 I/O 或分布式 I/O 组件。

1756-OB16E 提供每个通道 1 A @ 60 °C (140 °F) 或每个模块 8 A @ 60 °C (140 °F) 的输出电流。它的浪涌电流额定值为 2 A，每点持续 10 ms，可在 0 °C (32 °F) @ 24V DC 时每 2 s 重复一次。此外，该模块的*小负载电流为每通道 3 mA。

每组提供内置电子丝。每个输出通道的 OFF 到 ON 输出延迟时间为 70 μs nom/1 ms，值和 On 到 Off 延迟时间为 360 μs nom/1 ms，值。它从背板汲取的电流在 5VDC 时为 250 mA，在 24VDC 时为 2 mA，而总背板功率要求为 1.32 瓦，功耗为 4.1 W @ 60 °C (140 °F)。

1756-OB16E 模块的电压类别为 12 至 24 V DC 电源电压，以及 10 至 31.2 V DC 的工作电压。其总背板功率为 1.32 瓦，电流消耗为 250 毫安（5.1 伏）和 2 毫安（24 伏）。它还具有每点 1 毫安的断态泄漏电流和 400 mV 的直流电压，在 1 安培的通态压降下。其每点的电流在 60 摄氏度时为 1 安培，每个模块的电流在 60 摄氏度时为 8 安培。该模块已在 1350 伏交流电下进行了 2 秒的例行测试，并且具有 250 伏的连续隔离电压。其*小负载电流为每点 3 毫安，其典型浪涌电流为每点 2 安，持续 10 秒，在 0 摄氏度时每 2 秒可重复一次。该模块的功耗在 60 摄氏度时为 4.1 瓦，而其热耗散为 13.98 BTU/小时。它的输出延迟时间为 70 微秒标称/ 1 毫秒从关闭到打开和 360 微秒标称/ 1 毫秒从打开到关闭。其工作温度在0至60摄氏度之间，其非工作温度在-40至85摄氏度之间。该模块还允许修改故障模式下的状态和程序模式下的状态。其工作温度在0至60摄氏度之间，其非工作温度在-40至85摄氏度之间。该模块还允许修改故障模式下的状态和程序模式下的状态。其工作温度在0至60摄氏度之间，其非工作温度在-40至85摄氏度之间。该模块还允许修改故障模式下的状态和程序模式下的状态。

1756-OB16E美国进口模拟输入模块 系统自动化模块备件

The 1756-OB16E is a single slot wide module that is compatible with any 1756 ControlLogix controller. It can be mounted to any 1756 ControlLogix rack, especially the 1756-A4; 1756-A17; 1756-A10; 1756-A13 and 1756-A17. In addition, it can be used as a local I/O or distributed I/O component.

The 1756-OB16E offers an output current of 1 A@ 60 °C (140 °F) per channel or 8 A@ 60 °C (140 °F) per module. It has A surge current rating of 2 A for 10 ms per point and can be repeated every 2 s at 0 °C (32 °F) @24V DC. In addition, the minimum load current of the module is 3 mA per channel.

Each set provides built-in electronic wire. The OFF to ON output delay time for each output channel is 70 μs nom/1 ms, and the On to Off delay time is 360 μs nom/1 ms, value. The current it draws from the backplane is 250 mA at 5VDC and 2 mA at 24VDC, while the total backplane power requirement is 1.32 watts and the power consumption is 4.1 W @ 60 °C (140 °F).

The 1756-OB16E module's voltage class is 12 to 24 V DC supply voltage, and 10 to 31.2 V DC operating voltage. Its total backplane power is 1.32 watts, and current consumption is 250 mA (5.1 volts) and 2 mA (24 volts). It also has an off-state leakage current of 1 mA per point and a DC voltage of 400 mV at an on-state voltage drop of 1 amp. The current at each point is 1 amp at 60 degrees Celsius, and the current at each module is 8 amps at 60 degrees Celsius. The module has been routinely tested for 2 seconds at 1350 volts AC and has a continuous isolation voltage of 250 volts. Its minimum load current is 3 mA per point, and its typical surge current is 2 amp per point for 10 seconds, which can be repeated every 2 seconds at 0 degrees Celsius. The module's power consumption is 4.1 watts at 60 degrees Celsius, while its heat dissipation is 13.98 BTU/ hour. Its output latency is 70 microseconds nominal / 1 millisecond from off to on and 360 microseconds nominal / 1 millisecond from on to off. Its operating temperature is between 0 and 60 degrees Celsius, and its non-operating temperature is between -40 and 85 degrees Celsius. The module also allows modification of the state in fault mode and the state in program mode. Its operating temperature is between 0 and 60 degrees Celsius, and its non-operating temperature is between -40 and 85 degrees Celsius. The module also allows modification of the state in fault mode and the state in program mode. Its operating temperature is between 0 and 60 degrees Celsius, and its non-operating temperature is between -40 and 85 degrees Celsius. The module also allows modification of the state in fault mode and the state in program mode.