A-B/Mitsubishi 81001-450-53-R IGCT 可控硅 8100145053R

A-B/Mitsubishi 81001-450-53-R IGCT 可控硅 8100145053R

81001-450-53-R当写入该字段时，定时器4在下一次上升时加载写入的值计时器时钟的边缘，无论计时器是启用还是禁用。这个存储在该寄存器中的值也会在终端计数时自动重新加载（或超时）。

读取任一字段时，当前计数值被锁定并返回。有两种模式确定如何锁定计数，具体取决于WDT控制状态寄存器（CSR2）中的“读取锁存选择”位。

读取此字段时，当前计数值被锁定并返回。有两种模式确定如何锁定计数，具体取决于WDT控制状态寄存器（CSR2）中的“读取锁存选择”位。参见CSR2有关这两种模式的更多信息，请注册说明。定时器4电流计数寄存器（TMRCCR4）定时器4的电流计数可通过定时器4电流计数寄存器读取（TMRCCR4），位于BAR2中地址的偏移量0x28处。

81001-450-53-R When this field is written, timer 4 loads the edge of the written value timer clock on the next rise, regardless of whether the timer is enabled or disabled. This value stored in the register is also automatically reloaded (or timed out) when the terminal counts.

When either field is read, the current count value is locked and returned. There are two modes that determine how to lock the count, depending on the "Read latch Select" bit in the WDT Control status Register (CSR2).

When this field is read, the current count value is locked and returned. There are two modes that determine how to lock the count, depending on the "Read latch Select" bit in the WDT Control status Register (CSR2). See CSR2 for more information on both modes, please sign up for instructions. Timer 4 Current Count Register (TMRCCR4) The current count of timer 4 can be read using the timer 4 Current count register (TMRCCR4), located at offset 0x28 of the address in BAR2.