1783-ETAP1F 交换机扩展模块

1783-ETAP1F 交换机扩展模块

1783-ETAP1F 是罗克韦尔自动化制造的以太网分流器扩展模块，用于 Stratix 5000 和 Stratix 6000 以太网交换机。 它提供了三个额外的以太网端口，扩展了交换机的连接功能。

主要特点：

型：1783-ETAP1F系列

制造者：罗克韦尔自动化

端口类型：3 个以太网端口

端口速度：自动协商 10/100 Mbps

端口双工：自动协商半双工/全双工

光纤端口：1 x 100Base-FX 光纤端口

铜缆端口：2 x 10/100Base-TX 铜缆端口

DIN导轨安装：支持DIN导轨安装，安装方便

工作温度：-40°C 至 +70°C

尺寸： 102mm × 48mm × 25mm

应用：

扩展网络连接：增加可连接到 Stratix 5000 或 Stratix 6000 交换机的以太网设备数量。

分段网络：为不同类型的流量或安全区域创建单独的网段。

连接远程设备：将位于偏远地区的以太网设备连接到网络。

构建冗余网络：创建冗余网络路径以增强网络可靠性。

工业自动化系统：扩展工业自动化系统中的以太网连接，用于 PLC、HMI 设备和其他自动化组件。

好处：

增加网络容量：扩展可连接到网络的以太网设备数量，支持网络增长和额外的连接需求。

增强网络分段：支持创建单独的网段，以改进网络管理、安全性和流量控制。

扩展网络覆盖范围：将远程设备连接到网络，扩大网络覆盖范围并实现更远距离的通信。

提高网络可靠性：提供冗余网络路径，以确保网络正常运行时间，并在组件发生故障时最大限度地减少停机时间。

支持工业自动化应用：满足自动化系统的工业网络要求，为 PLC、HMI 设备和其他工业设备提供可靠和安全的以太网连接。

1783-ETAP1F 交换机扩展模块

The 1783-ETAP1F is an Ethernet shunt expansion module manufactured by Rockwell Automation for use in Stratix 5000 and Stratix 6000 Ethernet switches. It provides three additional Ethernet ports that extend the connectivity capabilities of the switch.

Main features:

Type: 1783-ETAP1F series

Manufacturer: Rockwell Automation

Port type: Three Ethernet ports

Port speed: 10/100 Mbps automatically negotiated

Port duplex: Automatically negotiates half duplex/full duplex

Fiber port: 1 x 100Base-FX fiber port

Copper port: 2 x 10/100Base-TX copper port

DIN rail installation: Support DIN rail installation, easy installation

Operating temperature: -40°C to +70°C

Size: 102mm × 48mm × 25mm

Applications:

Expand network connectivity: Increase the number of Ethernet devices that can connect to Stratix 5000 or Stratix 6000 switches.

Segmented network: Separate network segments are created for different types of traffic or security zones.

Connect remote devices: Connect Ethernet devices in remote areas to the network.

Build redundant networks: Create redundant network paths to enhance network reliability.

Industrial Automation Systems: Extend Ethernet connectivity in industrial automation systems for PLCS, HMI devices and other automation components.

Benefits:

Increase network capacity: Expand the number of Ethernet devices that can connect to the network to support network growth and additional connectivity needs.

Enhanced network segmentation: Supports the creation of separate network segments to improve network management, security, and traffic control.

Extend network coverage: Connect remote devices to the network to extend network coverage and enable communication over longer distances.

Improve network reliability: Provide redundant network paths to ensure network uptime and minimize downtime in the event of component failure.

Support for industrial automation applications: Meet the industrial networking requirements of automation systems and provide reliable and secure Ethernet connectivity for PLCS, HMI devices and other industrial equipment.

1783-ETAP1F 交换机扩展模块