— 产品中心 —
邮箱:A3669372910@163.com
手机:17359299796
电话:17359299796
地址:福建省漳州市龙文区朝阳北路1号办公楼205室
数字量输出卡件 5A26458G05 VATION系统 继电器输出底座品牌艾默生EMERSON/西屋封装/规格2x19x12.8cm最小包装量盒装规格2x19x12.8cm功能控制系统配件特点安装便捷名称AI卡件IOP加工定制否产地美国封装全新广泛应用化工造纸发电石油天然气数量1-999批号5A26458G05可售卖地全国用途IOP型号5A26458G055A26458G05具体操作方法:1、根据
产品详情
数字量输出卡件 5A26458G05 VATION系统 继电器输出底座
5A26458G05具体操作方法:
1、根据需要,调整定时开关(on:定时动作 off:定时解除)和动作状态钻换开关(l-on/d-on的转换)。
2、将已安装好的传感器送上电,上电后若没有检测到工件,指示灯显示。
3、将被检测的工件1送到对应的光纤头前,用专用螺丝刀顺时钟旋转调整灵敏度调整旋钮可增大传感器的灵敏度,反之则减小。
注意:在调整前要先考虑两工作的反光强度,反光度强的为工件1,弱的为工件2。
5A26458G05 Specific operation method:
1, adjust the timing switch (on: timing action off: timing release) and the action state drilling switch (l-on/d-on conversion) according to needs.
2. Power on the installed sensor. If no workpiece is detected after power-on, the indicator will show.
3, the detected workpiece 1 is sent to the corresponding optical fiber head, with a special screwdriver clockwise rotation to adjust the sensitivity adjustment knob can increase the sensitivity of the sensor, otherwise reduced.
Note: Before adjustment, the reflective intensity of the two jobs should be considered first, the strong reflector is the workpiece 1, and the weak is the workpiece 2.
相关推荐