330704-000-050-90-02-05 轴振动轴位移传感器探头

330704-000-050-90-02-05 轴振动轴位移传感器探头

本特利轴振动轴位移传感器探头330704-000-050-10-02-00属于本特利bently 3300 XL 11mm电涡流传感器系统，安装螺纹M14 x1.5, 带1米铠装电缆，用于非接触式振动和位移测量，可输出 3.94 V/mm ( 100mV/mil )。

330704-000-050-10-02-00本特利轴振动轴位移传感器探头主要应用在要求大线性范围的下列测量：轴振动轴位移、蒸汽轮机的斜面差胀测量、往复式压缩机活塞杆位移或下降的测量、转速计和零转速测量、键相位信号

应用范围：3300 XL11mm 趋近式传感器系统设计用于频率范围从0到8kHz 的位移或振动测量，典型应用包括径向振动和位移、轴向位移以及键相位测量。

传感器系统的所有组件都是镀金铜接头，锁定到适当位置，防止连接松动。

前置器从工厂供货时已经过AISI4140 钢校准。

接收非接触式 3300 XL11mm 电涡流探头和延伸电缆的信号。

电源： 无隔栅时要求-17.5Vdc至-26Vdc，电流为12mA，

现场联线:使用三芯屏蔽电缆。从3300 XL前置器到监测器的长度为305米（1000 英尺）

330704-000-050-90-02-05 轴振动轴位移传感器探头

Bentley Shaft vibration shaft displacement sensor Probe 330704-000-050-10-02-00 Belongs to the Bentley bently 3300 XL 11mm eddy current sensor system mounted with thread M14x1.5 and 1 meter armoured cable for non-contact vibration and displacement measurement. Output 3.94V /mm (100mV/mil).

330704-000-050-10-02-00 Bentley shaft vibration shaft displacement sensor probes are mainly used in the following measurements requiring large linear ranges: shaft vibration shaft displacement, inclined surface differential expansion measurement of steam turbines, piston rod displacement or drop measurement of reciprocating compressors, tachometer and zero speed measurement, key phase signal

Application Range: 3300 XL11mm approach sensor systems are designed for displacement or vibration measurement in the frequency range from 0 to 8kHz. Typical applications include radial vibration and displacement, axial displacement, and key phase measurement.

All components of the sensor system are gold-plated copper joints that lock into place to prevent loose connections.

The preprocessor has been calibrated from ISI4140 steel when supplied from the factory.

Receives signals from the non-contact 3300 XL11mm eddy current probe and extended cable.

Power supply: without grid requirements -17.5Vdc to -26Vdc, current is 12mA,

On-site connection: Use a three-core shielded cable. 305 m (1000 ft) from 3300 XL preprocessor to monitor