330105-02-12-10-02-00 监测器模块 增强型键相模块

330105-02-12-10-02-00 监测器模块 增强型键相模块

本特利bently 3300XL 8mm电涡流传感器系统包括：探头、延伸电缆、前置器

系统长度：5或9米（包括延长电缆）或1米（仅探头）。

电源：无安全栅时要求-17.5Vdc至-26Vdc，电流最大为12mA，

线性范围：2mm

推荐的间隙设定值：1.27mm

灵敏度（ISF）：7.87V/mm (200mV/mil)

频率响应：0-10kHz：从3300 XL 前置器到监测器的最大长度为305米现场联线。

轴直径推荐最小：76.2mm (3in)

探头工作温度：标准探头-52°C至+177°C；高温探头-52°C至+218°C

延长电缆温度：标准电缆-52°C至+177°C；高温电缆-52°C至+260°C

前置器工作温度：-52°C至+100°C

线性范围、精度和温度稳定性。

330105-02-12-10-02-00 监测器模块 增强型键相模块

Bentley bently 3300XL 8mm eddy current sensor system includes: probe, extension cable, preprocessor

System length: 5 or 9 meters (including extension cable) or 1 meter (probe only).

Power supply: No safety grid requirements -17.5Vdc to -26Vdc, the current is up to 12mA,

Linear range: 2mm

Recommended gap setting value: 1.27mm

Sensitivity (ISF) : 7.87V/mm (200mV/mil)

Frequency response: 0-10kHz: The maximum length from 3300 XL preprocessor to monitor is 305 m field connection.

Recommended minimum shaft diameter: 76.2mm (3in)

Probe operating temperature: standard probe -52°C to +177°C; High temperature probe -52°C to +218°C

Extended cable temperature: Standard cable -52°C to +177°C; High temperature cable -52°C to +260°C

Preprocessor operating temperature: -52°C to +100°C

Linear range, accuracy and temperature stability.