BENTLY  3500/64 动态压力监视器是一个单槽

3500/64动态压力监视器是单槽、4通道监视器，它  接受来自各种高温压力传感器的输入并使用它  驱动警报的输入。监视器每个通道的一个比例值为  带通动态压力。

3500框架配置软件将  配置带通转折频率，以及额外的陷波滤波器，  如果需要的话。监视器为控制系统提供记录器输出  应用程序。  

3500/64M监视器的主要用途是提供:  

1.通过持续比较监控参数来保护机器  根据配置的报警设定值驱动报警。  

2.操作和维护的基本机器信息  人事。  每个通道通常将其输入信号调节为各种参数，称为  “比例值”。用户可以为以下项目配置警报和危险设定值  每个活动比例值。

BENTLY  3500/64 动态压力监视器是一个单槽

The 3500/64 Dynamic Pressure monitor is a single-slot, 4-channel monitor that accepts input from a variety of high temperature pressure sensors and uses it to drive the input for the alarm. A proportional value for each channel of the monitor is the band-pass dynamic pressure.

The 3500 framework configuration software will configure the bandpass turn frequency, as well as additional notch filters, if needed. The monitor provides the logger output application for the control system.

The main purpose of the 3500/64M monitor is to provide:

1. Protect the machine by continuously comparing monitoring parameters to drive the alarm according to the configured alarm setting value.

2. Operation and maintenance of basic machine information personnel. Each channel typically adjusts its input signal to various parameters, called "proportional values." Users can configure alarm and hazard setpoints for each activity ratio value for the following items.