BENTLY本特利 3500/44M 176449-03航空衍生燃气轮机振动监测仪

BENTLY本特利 3500/44M 176449-03航空衍生燃气轮机振动监测仪

3500/44M气动衍生燃气轮机振动监测仪是为气动衍生型燃气轮机设计的四通道仪器应用。它通过比较持续监控机器根据配置的报警监控参数驱动报警的设定值沟通双方的基本机器信息操作和维护人员

3500/44M的Aero GT I/O模块与Velomitor接口通过Bently Nevada接口的传感器和加速计模块。监视器使用Prox/Velom I/O接口使用3500机架配置软件，您可以配置3500/44M Aeroderivative GT振动监测器

3500/44M Aeroderivative GT振动监测器接受来自两个独立键相器信号的输入，允许每个信道对使用不同的跟踪滤波器。您可以将多模通道配置为 多有八个报警参数集，包括警报和危险设置点和报警时间延迟。每组可配置用于特定的机器模式。当机器改变模式时，监视器可以切换到使用多模输入/输出模块上的触点的特定组，或通过通信网关的软件命令。

The 3500/44M Pneumatic Derived Gas Turbine Vibration Monitor is a four-channel instrument designed for pneumatic derived gas turbine applications. It communicates basic machine information to both operators and maintenance personnel by comparing continuous monitoring of the machine according to the set values of the alarm monitoring parameters driven by the configured alarm

The 3500/44M Aero GT I/O module interfaces with the Velomitor sensor and accelerometer module via the Bently Nevada interface. Monitor using Prox/Velom I/O interface With 3500 rack configuration software, you can configure 3500/44M Aeroderivative GT vibration monitor

The 3500/44M Aeroderivative GT vibration monitor accepts input from two independent keying phaser signals, allowing each channel pair to use different tracking filters. You can configure the multimode channel to have up to eight alarm parameter sets, including alarm and hazard setting points and alarm time delays. Each group can be configured for a specific machine mode. When the machine changes mode, the monitor can be switched to a specific group using contacts on a multimode input/output module, or by software command via a communication gateway.