1900-65A 风机振动监测器 通用设备

1900-65A 风机振动监测器 通用设备

1900/65A监视器有六个继电器输出，用户可以根据用户定义的逻辑语句对其进行编程以打开或关闭触点。逻辑语句使用任何通道或通道组合的OK、Alert和Danger状态作为输入。

用户可以使用软件将抑制/多倍跳闸输入配置为抑制或多倍跳闸。当配置为多倍跳闸短路时，抑制/多倍跳闸触点至RTN将增加报警和危险设定值。当配置为禁止时，禁止输入将禁止（绕过或停用）警报和危险状态。将INHIBIT触点短路至INHIBITRTN将：

将所有可变危险状态设置为逻辑

将所有变量警报状态设置为逻辑学

将旁路和禁止状态设置为logic 

1900-65A 风机振动监测器 通用设备

The 1900/65A monitor has six relay outputs that the user can program to open or close contacts based on user-defined logic statements. Logical statements use the OK, Alert, and Danger states of any channel or combination of channels as input.

Users can use software to configure the suppress/multitrip input to suppress or multitrip. When configured with a multitrip short circuit, suppressing/multitrip contacts to RTN will increase alarm and hazard setpoints. When configured to disable, disable input disables (bypasses or deactivates) alert and danger states. Short-circuiting the INHIBIT contact until INHIBITRTN:

Set all variable danger states to logical

Set all variable alert states to logic

Set the bypass and disable states to logic