3500/22M Bently 带有TDI的框架接口模块

3500/22M Bently 带有TDI的框架接口模块

3500/22M 功能

在 3500 机架中，TDI 位于电源旁边的插槽中。为了持续收集稳态和瞬态动态（波形）数据，并通过以太网链路将这些数据传输到主机软件，它与M系列监视器（3500/40M，3500/42M等）进行交互。

TDI 具有传统的静态数据收集功能。但是，TDI 也可以使用可选的通道启用磁盘记录动态、高分辨率瞬态数据。

功能说明

3500机架容纳了TDI的通信处理功能。尽管TDI执行一些由整个机架共享的任务，但它不是监控系统的关键组件，并且与整个系统监控自主机械保护的程度无关。

每个 3500 机架需要一个 TDI 或 RIM，并且始终占用插槽 1。（在电源旁边）。

3500 监测系统和兼容软件之间的链路称为 3500/22M 瞬态数据接口 （TDI）（系统 1 状态监测和诊断软件以及 3500 系统配置软件）。TDI 将 3500/20 机架接口模块 （RIM功能） 与通信处理器（如 TDXnet）相结合，以收集数据。

位置

在 3500 机架中，TDI 位于电源旁边的插槽中。为了持续收集稳态和瞬态动态（波形）数据，并通过以太网链路将这些数据传输到主机软件，它与M系列监视器（3500/40M，3500/42M等）进行交互。TDI 具有传统的静态数据收集功能。但是，TDI 也可以使用可选的通道启用磁盘记录动态、高分辨率瞬态数据。

3500机架容纳了TDI的通信处理功能。尽管TDI执行一些由整个机架共享的任务，但它不是监控系统的关键组件，并且与整个系统监控自主机械保护的程度无关。

每个 3500 机架需要一个 TDI 或 RIM，并且始终占用插槽 1。（在电源旁边）。

3500/22M Bently 带有TDI的框架接口模块

3500/22M function

In the 3500 rack, the TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit this data to the host software via an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.).

TDI has traditional static data collection capabilities. However, TDI can also enable disks to record dynamic, high-resolution transient data using an optional channel.

Function description

3500 racks house the TDI's communication processing capabilities. Although TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system and is not related to the extent to which the entire system monitors autonomous mechanical protection.

Each 3500 rack requires a TDI or RIM and always occupies slot 1. (Next to the power supply).

The link between the 3500 monitoring system and compatible software is called the 3500/22M Transient Data Interface (TDI) (System 1 condition monitoring and diagnostic software and 3500 system configuration software). TDI combines 3500/20 rack interface modules (RIM capabilities) with communication processors such as TDXnet to collect data.

position

In the 3500 rack, the TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit this data to the host software via an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.). TDI has traditional static data collection capabilities. However, TDI can also enable disks to record dynamic, high-resolution transient data using an optional channel.

3500 racks house the TDI's communication processing capabilities. Although TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system and is not related to the extent to which the entire system monitors autonomous mechanical protection.

Each 3500 rack requires a TDI or RIM and always occupies slot 1. (Next to the power supply).

3500/22M Bently 带有TDI的框架接口模块

型号推荐

ABB DCS GD C806 B01 ABB GJR5132200R0001 35AB90 可编程控制器模块

ABB DCS UC C922 A ABB 07ZE40 gjr2268800r22 通道，本安型模拟输出

ABB DCS UF C911 B101 ABB GJR2359200R0850 CC1模块

ABB DCS UD C920 BE101 ABB 07YS40 gjr2268700r1 变压器

ABB DCS UFD402A101 ABB GJR5132200R0001 / 35AB90 魏德米勒

ABB DCS UD C920 BE102 ABB GJR5142600R0001 35EB91B 通讯器

ABB DCS UA D155 A0111 ABB GJR5215100R1 POWER SUPPLY BOARD 求教器

ABB DCS DD C779 CE102 ABB GJR5215200R0001 07TI81 开关电源

ABB DCS PC D237 A101 ABB 07XS40 E gjr2268600r1 PLC模块