本特利 140471-01 Prox/Velom I/O模块与内部终端

本特利 140471-01 Prox/Velom I/O模块与内部终端

本特利 140471-01 Prox/Velom I/O模块与内部终端

本特利3300检测系统

本特利内华达公司生产的3300监测系统，可提供可靠的精确信息。可连续地测量和监视不同的机器运行状态参数,对于早期发现机器故障，诸如:轴承不平衡、失效、不对中以及轴裂纹,可提供重要的信息。

采用编程短接块，用户可在现场选择不同的监测方案:3300系统的设计满足了API670和678标准，并且可以连接计算机;3300监测系统采用积木式模块化。一个3300系统包括一次探头、高频同轴电缆、前置器和监视器,监视器又由框架、电源、系统监视器、及其所选的检测器以及相应的检测器和传感器系统的任意组合

框架

3300框架具有各种不同尺寸可供选用，用户可选用一种尺寸刚好合适的框架，以满足具体监测的需要。例如，如果用户仅仅需要两个监测器,可以订购一个有四个位的3300监测器框架。用以安装电源,系统监测器，以及所需要的两个监测器。但是如果将来需要更多一些监测器，在现场就可以把监测器框架扩大。只要在原有的基础上，加上几个机架扩展单元即可。

本特利 140471-01 Prox/Velom I/O模块与内部终端

Bentley 3300 inspection system

Bentley Nevada's 3300 monitoring system provides reliable and accurate information. The continuous measurement and monitoring of different machine operating state parameters provides important information for early detection of machine failures such as bearing unbalance, failure, misalignment and shaft cracks.

With programmed short blocks, users can choose different monitoring schemes in the field: the design of the 3300 system meets the API670 and 678 standards, and can be connected to the computer; 3300 Monitoring system adopts modular building blocks. A 3300 system consists of a primary probe, a high-frequency coaxial cable, a preprocessor, and a monitor, which in turn consists of a frame, a power supply, a system monitor, a detector of its choice, and any combination of the corresponding detector and sensor systems

frame

3300 frame has a variety of different sizes available, the user can choose a size just right frame to meet the needs of specific monitoring. For example, if a user needs only two monitors, they can order a four-bit 3300 monitor frame. To install the power supply, the system monitor, and the two monitors required. However, if more monitors are needed in the future, the monitor frame can be expanded in the field. As long as on the basis of the original, add a few rack expansion units.