3500/15 106M1081 3500/15交流/直流电源模块

3500/15交流/直流电源模块为半高模块，必须安装在机柜左侧的指定槽位上。3500机柜支持单路或双路交流电源和直流电源的任意组合。任何一种电源都可以为整个机架供电。

当机架内安装两个电源时，下槽位的一个作为主电源，上槽位的另一个作备用电源。如果安装了，第二个电源是主电源的备份。

只要安装了另一个电源，插拔任意一个电源模块都不会影响机架的正常运行。

3500/15交流和直流电源接受广泛的输入电压，并将其转换为其他3500模块可接受的电压。以下电源可与3500系列机械保护系统一起使用:

l通用交流电源

l高压直流电源

l低压直流电源

说明该选项采用通用交流电源和通用交流电源输入模块(PIM)。输入电压110至220 Vac标称85至264 Vac有效值120至373 Vac pk

通用交流电源和电源输入模块不兼容传统的高压交流或低压交流单元。

3500/15 106M1081 3500/15交流/直流电源模块

The 3500/15 AC/DC power module is half-height and must be installed in the specified slot on the left of the cabinet. The 3500 cabinet supports any combination of single or dual AC power supplies and DC power supplies. Any kind of power supply can power the entire rack.

When two power supplies are installed in a rack, one in the lower slot serves as the active power supply, and the other in the upper slot serves as the standby power supply. If installed, the second power supply is a backup of the main power supply.

As long as the other power supply is installed, the insertion or removal of either power module does not affect the normal running of the rack.

The 3500/15 AC and DC power supplies accept a wide range of input voltages and convert them to voltages acceptable to other 3500 modules. The following power supplies can be used with the 3500 Series mechanical protection system:

l Universal AC power supply

l High voltage DC power supply

l Low voltage DC power supply

This option uses the universal AC power supply and universal AC Power input module (PIM). Input voltage 110 to 220 Vac Nominal 85 to 264 Vac RMS 120 to 373 Vac pk

General purpose AC power supplies and power input modules are not compatible with traditional high voltage AC or low voltage AC units.