P3403893-0351 改进型振动变送器

P3403893-0351 改进型振动变送器

P3403893-0351 是来自内华达州本特利的增强型振动变送器，设计用于连续监测工业机械振动。它将振动测量值转换为 4-20 mA 输出信号，以便与工厂控制系统集成。与以前的型号相比，此增强版本提供了改进的性能和功能。

P3403893-0351 的主要特点：

高精度：提供满量程 ±2% 的高精度，确保精确的振动测量。

宽频率范围：支持 10 Hz 至 10 kHz 的宽频率范围，涵盖广泛的振动条件。

坚固的结构：专为恶劣的工业环境而设计，可承受振动、冲击和极端温度。

两线制设计：采用两线制环路供电设计，简化安装并降低布线成本。

本质安全认证：经认证可用于危险区域，符合爆炸性环境的安全标准。

P3403893-0351的应用：

预测性维护：监测机械振动以检测故障的早期迹象，防止代价高昂的停机和计划外维护。

状态监测：持续跟踪振动水平，以评估旋转机械的健康和性能。

根本原因分析：确定振动问题的根本原因，实现有针对性的维护和故障排除。

性能优化：通过减少过度振动和提高整体效率来优化机械性能。

安全保证：通过防止与振动相关的故障来确保关键机械的安全运行。

使用 P3403893-0351：

安装：

将 P3403893-0351 振动变送器安装在机器上的合适位置，确保正确安装和对齐。

按照 Bently Nevada 提供的安装说明将振动探头连接到变送器。

将电源和输出信号线连接到变送器，确保极性和接地正确。

配置：

使用 Bently Nevada 的配置软件或工具配置变送器，设置灵敏度、报警阈值和输出参数。

将变送器集成到整个工厂控制系统中，定义数据映射和通信协议。

测试和调试：

对振动变送器进行彻底测试，以确保正确的信号采集、缩放和错误处理。

执行调试测试，以验证振动探头、变送器和工厂控制系统之间的正确交互。

验证振动监测系统在预期应用中的整体功能和性能。

P3403893-0351 改进型振动变送器

The P3403893-0351 is an enhanced vibration transmitter from Bentley, Nevada, designed for continuous monitoring of industrial machinery vibration. It converts vibration measurements into 4-20 mA output signals for integration with plant control systems. This enhanced version offers improved performance and features compared to previous models.

Main features of P3403893-0351:

High accuracy: Provides full scale accuracy of ±2% to ensure accurate vibration measurement.

Wide frequency range: Supports a wide frequency range from 10 Hz to 10 kHz, covering a wide range of vibration conditions.

Rugged construction: Designed for harsh industrial environments, it withstands vibration, shock and extreme temperatures.

Two-wire design: Using two-wire loop power supply design, simplify installation and reduce wiring costs.

Intrinsically safe certification: Certified for use in hazardous areas and compliant with safety standards for explosive environments.

Application of P3403893-0351:

Predictive maintenance: Monitor mechanical vibration to detect early signs of failure and prevent costly downtime and unplanned maintenance.

Condition monitoring: Continuously track vibration levels to assess the health and performance of rotating machinery.

Root cause analysis: Identify the root cause of vibration problems for targeted maintenance and troubleshooting.

Performance optimization: Optimize mechanical properties by reducing excessive vibration and improving overall efficiency.

Safety Assurance: Ensure the safe operation of critical machinery by preventing vibration-related failures.

Using P3403893-0351:

Installation:

Install the P3403893-0351 vibration transmitter in the proper position on the machine, ensuring proper installation and alignment.

Connect the vibration probe to the transmitter by following the installation instructions provided by Bently Nevada.

Connect the power and output signal wires to the transmitter to ensure correct polarity and grounding.

Settings:

Configure the transmitter with Bently Nevada's configuration software or tool to set sensitivity, alarm thresholds, and output parameters.

Integrate transmitters into the entire plant control system, define data mapping and communication protocols.

Testing and debugging:

Vibration transmitters are thoroughly tested to ensure proper signal acquisition, scaling and error handling.

Perform debugging tests to verify proper interaction between vibration probes, transmitters, and plant control systems.

Verify the overall function and performance of the vibration monitoring system in the intended application.

P3403893-0351 改进型振动变送器